Kit Finish Glass Cernit 500 + 250 ML

The Cernit Finish Glass Kit is a transparent varnish based on epoxy resin with 2 components.
It has a very strong and very glossy crystal effect finish. Suitable for diffrent techniques to obtain a hardness and transparency similar to glass.
It allows to achieve thick layers perfectly levelled and whithout bubbles. It is also possible to add layers progressively when drying to get 3D effects.
Can be coloured with solvent-based colors.
Drying time 12 to 24 hours (depending on the humidity and temp)
Clean equipment with a solvant cleaner.

Applications :

• Applicable on baked polymer clay, wood, cardboard, metal, plaster, ceramics, stone etc.
• Apply with a brush (it have to be cleaned with a solvant) or directly from the container in which the mixture was made
• Measure 2 parts of component A (resin), add 1 part of component B (hardener)
• Shake the mixture energetically for about 2 minutes, it's very important that it's well mixed
• Pour on the surface uniformly with a spatula
• The unused mixture will begin to thicken after 20 mn, making it unusable
• Avoid contact with dust on the surface during drying time