Swellegant Matt Sealant 6 oz

Christi Friesen's Swellegant Matt Sealant to protect your Swellegant creations.

The Sealant is also a very good matt protective varnish usable on your polymer creations as well as on all metals, as any other varnish or glaze.

Non-hazardous, no-odor, no-cracking, top coating that works with all Swellegant metal coatings, patinas and Dyes.

Create a strong protective, flat (non shiny) finish. Water-based, eco-friendly coating.

Shake well before opening. If sealant thickens in the bottle over time, it may be thinned with distilled water.

Directions for use :

• Make sure surface to be coated is clean. Swellegant metal coatings/patinas/dyes should be fully cured, at least 48 h.
• Mist, rub or brush a thin coat of Swellegant clear sealant onto the surface of your piece. Add additional coats if needed, drying between coats.
• Do not apply too thickly or allow to puddle (or coating may remain milky-looking)
• Coating works best in low humidity/mild temperatures. Avoid excessive heat or cold.
• It dries to touch within 20/30 minutes and is safe to handle. It is fully cured in 72 hours.